Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trusted Duct Repair & Sealing for Tremont Homeowners
If your energy bills keep climbing while the rooms upstairs never quite warm up, the ducts themselves are often the culprit. Tears at joints, failed mastic and sagging flex runs waste conditioned air before it ever reaches a register. Our technicians have up to 8 years of experience finding those leaks with professional-grade equipment, and we treat duct repair & sealing as the step that makes every cleaning afterward worth it. We seal what we clean. For a no-obligation estimate in Tremont, call (833) 468-5768.
What Our Duct Repair & Sealing Service Includes
Sealing a duct system is not one task. It’s a sequence of repairs matched to the material and the failure you have. Here is what each part of the work involves and when it becomes necessary.
Duct Sealing
Duct sealing closes the gaps at joints, seams and boot connections so air stays inside the system instead of leaking into a wall cavity or attic. You need it when rooms feel under-supplied, when dust collects on register faces, or when a system has never been sealed since installation. We combine mechanical fastening with mastic at every accessible joint, then verify airflow at the registers before we leave.

Flex Duct Repair
Flex duct is the corrugated plastic run you’ll see in most newer residential installs, and it fails at the connections and wherever it’s been crushed or kinked. Repair is necessary when a run has torn at the collar, sagged between hangers, or collapsed under a joist. We re-stretch, re-support and re-secure the run or replace the damaged section with properly sized flex, never squeezing it into a tight turn that kills airflow.

Metal Duct Repair
Sheet metal ducts are durable but not indestructible. Seams separate, fasteners back out, and sections dent or disconnect at trunk takeoffs. You need metal duct repair when you can hear whistling at a joint or feel air moving where there shouldn’t be any. We reseal seams with mastic, reattach sections with proper fasteners, and replace crushed sections that can’t be straightened.

Duct Insulation
Duct insulation wraps the duct run to slow heat loss or gain before the air reaches the room. It matters most on runs through unconditioned space, where uninsulated metal sweats in summer and loses heat in winter. We assess the existing wrap, repair damaged sections, and add insulation where a run is missing it, using materials matched to the duct type and location.
Mastic Sealant
Mastic is a brush-on sealant that bonds to metal and flex collars and stays flexible as the system cycles. It’s the workhorse of a real duct sealing job, applied at every seam and joint that duct tape alone would fail on within a season. We apply mastic only to clean, dry surfaces, because sealing over dust or condensation just hides the problem.
Air Leak Repair
Air leaks are the sum of every small failure in the system, and they add up to real energy loss. You need air leak repair when you notice pressure problems, hot or cold spots, or a return that pulls air from a crawlspace. We trace leaks through the accessible duct system, seal what we find, and confirm the supply and return sides are balanced before we finish.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Brands We Service for Duct Repair & Sealing
Our equipment is professional-grade, not improvised tools. We use Rotobrush and Nikro systems for mechanical agitation and high-powered extraction inside the duct run, and Abatement Technologies air filtration equipment to keep airborne particulate under control while we work. When we seal and clean a system, we can also recommend or install Honeywell and Aprilaire air quality products so the cleaned system stays clean.
Whether a home has Rotobrush-compatible cleaning needs, an older metal system with unknown history, or Aprilaire filtration already in place, we know where each component wears out and how to work around it. Tell us what’s installed before we arrive and we’ll bring the right equipment for that system. Whether you have one of these brands or any other make, we can help.
Signs You Need Duct Repair & Sealing Right Now
- Rooms that never reach the thermostat setting. A room that stays cold in winter and hot in summer usually has a leaking or disconnected run feeding it. Sealing the run restores the airflow that room was designed to get.
- Whistling or hissing at registers or joints. That sound is pressurized air escaping through a gap. It’s one of the easiest problems to confirm and one of the fastest to fix with mastic and proper fastening.
- Dust settling on register faces or nearby surfaces. Dust on a supply register often means air is pulling in unfiltered air from a gap in the return side. Sealing the return removes the path that dust follows back into the living space.
- Higher energy bills with no change in usage. Leaking ducts make the system run longer to deliver the same comfort. A sealed system lets the equipment do the job it was sized for.
- Visible tears, crushed runs or disconnected joints. If you can see a tear or a run pulled off its collar in an accessible area, it’s already leaking. Inspect what you can safely reach and call us to repair what you find.
Our Duct Repair & Sealing Process – Step by Step
Every job follows the same sequence. It keeps us honest about what we find and keeps you informed about what we’re doing.
- 1
System walkthrough and airflow check. We inspect every accessible duct run, register and return, checking for tears, disconnected joints, crushed sections and missing insulation. We measure airflow at the registers to establish a baseline before we start repairing anything.
- 2
Cleaning before sealing. Sealing over dust or debris traps contamination inside the system. We run the Rotobrush and Nikro equipment first, agitating and extracting buildup so the surfaces we’re about to seal are actually clean and dry.
- 3
Repair and seal, joint by joint. We re-stretch, re-support or replace failed flex runs, reseal metal seams with mastic, and secure every connection we can reach. Where insulation is damaged or missing, we repair or add it at the same time.
- 4
Air filtration during the work. We bring Abatement Technologies air filtration equipment to capture airborne particulate while we repair and seal, so dust doesn’t settle through the rest of the home. Guardsman-grade surface protection standards apply to any finished space we walk through.
- 5
Post-repair verification. We re-measure airflow at the registers and confirm the supply and return sides are balanced. You get a walkthrough of what we repaired and why, and we answer questions before we pack up.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Duct Repair & Sealing Cost in Tremont?
Duct repair and sealing in Tremont typically runs $350-$650 for a small number of joints and one or two flex runs, somewhere in the $650-$1,200 range for a full-system seal with insulation repair, and more for systems that need substantial flex replacement or multiple disconnected sections rebuilt. The final figure depends on the number of accessible runs, how much flex needs to be replaced versus re-secured, whether insulation is added, and how much contamination has to be cleaned out first. Older homes with original metal systems often need more joint sealing than recently installed flex systems. To avoid overpaying, ask for the written estimate to list each repair separately and confirm the price is per system, not per joint. What’s included in a free estimate: the walkthrough, airflow baseline, the breakdown of repairs, and the written price agreed before work starts. Call (833) 468-5768 for a free estimate.
Duct Repair & Sealing Near Tremont – Our Service Area
We take on duct repair and sealing across Tremont and the neighborhoods around it, including University Heights, Bedford Park, Fordham, West Farms, Morrisania, Highbridge and Concourse. Washington Heights, Inwood and Parkchester are also regular stops, typically within the same dispatch window. See our duct repair & sealing and duct repair & sealing pages for the areas next door. Call (833) 468-5768 to book.
Serving Tremont, NY – Our Local Coverage Area
We serve Tremont and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Duct Repair & Sealing in Tremont
Duct repair and sealing is the process of fixing leaks in the duct system and closing them with mastic or mechanical fastening so air stays where it’s meant to go. It covers flex runs, metal runs, insulation and every joint between them. It’s different from cleaning, which removes buildup, and it’s the step that keeps buildup from re-entering. If your system leaks, clean it and seal it in the same visit. Call (833) 468-5768 for a free estimate.
Most residential jobs finish in two to four hours, depending on how many runs need repair and whether cleaning is part of the visit. A single flex repair with sealing takes less time than a full-system seal with insulation work. We’ll give you a time estimate with the written quote. To schedule, call (833) 468-5768.
Typical duct repair and sealing in Tremont runs $350-$650 for minor repairs and $650-$1,200 for a full-system seal with insulation work, with larger jobs costing more. The written estimate sets the final price, so you’ll know the number before we start. The estimate is free. Call (833) 468-5768.
Yes, we work with Rotobrush, Nikro, Aprilaire, Honeywell, Abatement Technologies and Guardsman equipment, and we know how each one fits into a repair and sealing job. Our cleaning and filtration tools are built for this kind of work, not run-of-the-mill shop tools. Call (833) 468-5768 to describe your setup.
We offer same-day service on many jobs when the schedule allows. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (833) 468-5768.
Warranty coverage on duct repair and sealing depends on the materials used and the extent of the work, so we confirm the terms in the written estimate rather than assume them. The confirmed terms are what you get on paper before work starts. Call (833) 468-5768 to talk through the specifics for your system.
Clear access to the registers, furnace and the crawl or attic opening, and move anything fragile away from the work area. Keep pets in a closed room while we’re working, since we use equipment that agitates dust. We handle the rest, including surface protection in finished spaces. Call (833) 468-5768 if you have questions before the visit.
Schedule Your Duct Repair & Sealing Service in Tremont Today
Sealing the ducts is the step that makes every cleaning and every air quality improvement last. Our technicians have up to 8 years of experience, we use Rotobrush, Nikro and Abatement Technologies equipment on every job, and we agree on one flat price per system before work starts. Call (833) 468-5768. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free and there’s no obligation.
Written by the team at Air Duct Cleaning Tremont.