Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Repair & Sealing Across Inwood
If your bathroom exhaust barely clears steam or soot streaks show up around a ceiling register, the ducts in your Inwood apartment are telling you something. We handle duct repair and sealing for Inwood buildings every week, and we know how the housing stock here behaves. Inwood is Manhattan’s last affordable tenant-heavy neighborhood, and most of its pre-war and mid-century rental buildings were never given the luxury treatment. That changes how the work gets done. Call (833) 468-5768 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Inwood Homeowners Call Air Duct Cleaning Tremont for Duct Repair & Sealing
Inwood is a specific kind of place to work in. The neighborhood sits on a hilltop between two rivers at the northern tip of Manhattan, which means humid summer air and street-locked heat push window-unit A/C and building ventilation hard through July and August. Winter leaves soot and salt on the exterior, and radiator dust builds up indoors, seeding the spring rush. When that heat arrives, ducts that were already leaking bleed that grit into apartments.
We’re a duct-and-air-system specialist, not a general HVAC company. That matters in a building where the ducts are hidden behind plaster and shared with neighbors, because the diagnosis is most of the job. We use Rotobrush and Nikro equipment for mechanical agitation and high-powered extraction, and Abatement Technologies air filtration for airborne particulate control, the same standard used in professional remediation work. We seal what we clean, so the leak you call about actually stays sealed.
We connect you with vetted local professionals who are licensed and insured as their state requires, and the work is priced per job by a written estimate before anything starts. Our technicians have up to 8 years of experience with exactly this kind of hidden, shared-riser ductwork. You can read more about how we approach duct repair & sealing across the full range of buildings we work in.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our Duct Repair & Sealing Services in Inwood
These are the four services we handle most often in Inwood buildings, and each one runs into a different local problem.
Duct Sealing
Inwood’s pre-war and mid-century buildings often share risers between apartments, so sealing one unit’s registers without addressing the riser joint leaves the problem intact. We locate the actual break, not just the register nearest the soot, and seal at the source. That’s the difference between a fix that holds and one that reappears the next humid July.

Flex Duct Repair
Pre-war renovations frequently capped or rerouted ducts without sealing them properly, leaving dead-end flex runs that collect lint and moisture and starve the air handler of return air. We trace those runs and repair or remove the failed sections. In a walk-up where a previous renovation left a duct disconnected above a bathroom ceiling, this is often the whole reason the fan underperforms.

Metal Duct Repair
Original iron and galvanized ductwork in 1910s – 1940s Inwood buildings develops pinhole leaks and separated joints over time. Those joints are where exhaust from the 207th Street rail yard and the Broadway corridor gets pulled in and spread to multiple apartments. We repair the metal at the joint, then verify it with a camera before closing anything up.

Duct Insulation
Insulation matters most on runs that pass through unheated spaces or sit against an exterior wall, where humid summer air condenses on cold duct surfaces. In Inwood’s older buildings, that condensation feeds the moisture and musty smell tenants notice first. We insulate the runs that need it without adding bulk where there’s no clearance behind the plaster.
Trusted Brands We Service in Inwood
We work with professional-grade equipment rather than improvised tools, and we’re familiar with the air quality product lines that come up most in Inwood buildings. Rotobrush and Nikro systems handle the cleaning and agitation side. Honeywell and Aprilaire products come up when a homeowner or property manager wants filtration or humidity control added to the same visit as the repair and sealing. We don’t claim to stock parts on a truck, and we won’t pretend a brand name alone fixes a leak. What we do is diagnose the system you have, tell you what’s failing, and price the fix per job.
See the difference
Before
After
Before
After
Before
AfterCommon Duct Repair & Sealing Problems We See in Inwood Homes
- Pinhole leaks and separated joints in original iron ductwork. Buildings from the 1910s through the 1940s develop small failures that bleed soot from the rail yard into several apartments at once. The leak is rarely where the soot appears.
- Capped or rerouted ducts from old renovations. Pre-war remodels often abandoned a run without sealing it, leaving a dead-end that collects lint and moisture and throws off the air balance for the whole apartment.
- Shared risers in six-story brick buildings. Cooking exhaust and bathroom moisture migrate between units through joints nobody sealed. Fixing one apartment’s registers without the riser joint does nothing.
- Condensation on cold duct runs in humid summers. Inwood’s hilltop humidity pushes condensation onto uninsulated runs, and that moisture feeds the microbial growth behind a musty odor.
Pricing for Duct Repair & Sealing in Inwood, NY
Honest ranges for the Inwood market: a typical single-apartment duct sealing job runs $300 – $650. Metal duct repair on a failed joint or short run usually lands between $250 and $550. A full mastic sealant treatment of accessible joints in a pre-war apartment typically runs $400 – $800. Duct insulation on a handful of runs comes in around $350 – $700. In a multi-unit building with several systems, pricing is per system, so three separate systems get three line items, not one blended number. We confirm a flat price by written estimate before we start, and the estimate is free. Call (833) 468-5768 to get one.
We Also Serve Cities Near Inwood
We work across northern Manhattan and the nearby neighborhoods, including University Heights, Kingsbridge, Spuyten Duyvil, and Washington Heights. If you’re just over the line from Inwood, the housing stock is often close enough that the same approach applies. Call and we’ll tell you what to expect for your building.
Serving Inwood, NY – Our Local Coverage Area
We serve Inwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Duct Repair & Sealing in Inwood
Because most Inwood ductwork is hidden behind plaster and shared with neighbors, a camera inspection is often the only way to see the actual failure. Original iron ducts in 1910s – 1940s buildings are small, sometimes U-shaped, and frequently closed off during old renovations, so guessing at the leak location wastes time and money. A camera confirms the break before anyone seals it. Call (833) 468-5768 for an exact quote. Estimates are free.
The dense heating-fuel and garbage-truck exhaust from the rail yard and the Broadway corridor gets pulled into bathroom and kitchen exhausts, then migrates through shared risers. Buildings on that edge are noticeably darker and grittier inside than those a few blocks off. The fix is source sealing at the joint, not repeated cleaning of the register. Call (833) 468-5768 to book an inspection.
Yes. Inwood has some of NYC’s oldest radiator systems, and the moisture they contribute combines with humid summer air and leaks in uninsulated duct runs to feed musty odors and microbial growth. Sealing the broken joints and insulating the cold runs cuts that moisture path. It doesn’t replace ventilation, but it stops one major source. Call (833) 468-5768 to talk through your building.
You should get before-and-after photos of your own ducts and the specific joints that were sealed, since you can’t see the work once the plaster is back. In a shared riser, that documentation also protects you if a neighbor later reports the same problem. Ask for photos of every seal, not just one. Call (833) 468-5768 for a free estimate and a clear scope in writing.
Yes. The 1960s – 70s slab buildings and newer mid-rise rentals near 207th Street usually have more standard, rounder duct runs that are easier to access and seal. Pre-war walk-ups need camera inspection and manual sealing of joints that are small, irregular, and often shared. The approach changes with the building, which is why we inspect first. Call (833) 468-5768 to schedule yours.
Written by the team at Air Duct Cleaning Tremont.