Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Lennox Air Duct Cleaning in Melrose, NY
We provide independent Lennox air duct cleaning and HVAC system service across Melrose, NY. What makes our Lennox work different here: most Melrose systems aren’t tidy single-family installs but Lennox air handlers and furnaces retrofitted into tenement closets with improvised duct runs, and we clean and seal those shared paths rather than just vacuuming what’s visible. We work on the brand daily without any manufacturer affiliation, authorization, or warranty endorsement. Call (833) 468-5768 to book a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Why Melrose Residents Choose Us for Lennox Service
Air Duct Cleaning Tremont specializes in ducts and air systems, not general HVAC repair. That focus matters on Lennox equipment, because a Lennox furnace or air handler in a Melrose walk-up asks different questions than the same unit in a suburban basement: short return runs, shared flues, closet installs with almost no clearances.
We bring professional-grade Rotobrush and Nikro systems to every job, plus Abatement Technologies filtration for airborne particulate control. This is mechanical agitation and high-powered extraction, not a shop vac pushed into a floor grille. Our technicians have up to 8 years of experience, and we choose quality parts that fit the Lennox equipment we’re working on.
Scheduling is straightforward. One flat price per system, agreed before any work starts, and before-and-after photos of your own ducts so you can see what changed. We’re serving Melrose buildings of every size, from a single apartment to a full walk-up managed by an owner. Call (833) 468-5768 for a free estimate.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Lennox Air Duct Cleaning Problems We Solve in Melrose
Lennox equipment is well-built. The trouble in Melrose usually comes from how it gets installed into pre-war housing stock, and from what the ductwork around it has been doing for decades. These are the failure modes we run into:
- Undersized air handlers shoved into tenement closets. When a Lennox air handler is adapted into a tight closet with short, improvised duct runs, static pressure climbs and the blower motor strains. In a 5-story walk-up with masonry walls and little room to run duct, this shows up as noisy operation and weak airflow at the far grilles.
- Condensate problems at the evaporator coil. Pre-war masonry walls rarely have a proper drain path, so Lennox coils often get paired with shared or undersized drain lines. That leads to water damage and, over time, mold inside the ductwork itself.
- Failing connections at the supply plenum. Where a Lennox plenum meets old sheet-metal or flex runs, deteriorating mastic and tape let dust pull in. In buildings where exhaust risers and shared party-wall ducts run close by, that gap can also pull flue gases into the supply path.
- Control board and limit switch failures from restricted airflow. A clogged return duct raises static pressure, and Lennox furnaces respond by tripping limit switches or stressing the control board. This is especially common when return air is drawn from a shared corridor or a neighboring unit’s space.
- Lint-packed blower wheels. In dusty, densely occupied Melrose buildings the blower wheel loads up faster than most owners expect, and airflow drops gradually enough that nobody notices until the system is badly restricted. This is where video inspection earns its keep.
Lennox Service in Melrose: What Local Conditions Mean for Your Equipment
In the dense walk-up blocks near the 10455 core, ductwork is usually a retrofit, not a designed system. Original buildings went up around 1900 to 1930 with lath-and-plaster interiors and no central ductwork at all. Central air arrived later, which means a Lennox air handler often sits in a closet connected to improvised sheet-metal and flex, and some of those runs pass through or alongside party walls shared with the next apartment. That’s the part a generic Lennox page can’t tell you: ducts and flues in these blocks are frequently shared between adjacent units, so one tenant’s dusty-air complaint can trace back to a neighbor’s kitchen or bathroom exhaust rather than their own system.
For Lennox owners, that changes the job. Cleaning without checking where the return air actually comes from just moves contaminated air around. This is why smoke-testing for cross-unit leaks belongs in the scope here, and it’s something a suburban single-family cleaning almost never calls for.
Lennox Models & Products We Service in Melrose
We work on the Lennox model lines that show up in Melrose buildings: Merit Series furnaces and air handlers, Elite Series furnaces and air handlers, Signature Collection furnaces and air handlers, and ducted and ductless mini-split systems. Whether it’s a gas furnace feeding a retrofit trunk or a mini-split head cooling one apartment, the approach starts the same way: understand the equipment, then look at the duct and air path around it.
For critical components like control boards, blower motors, and heat exchangers, we use OEM Lennox parts to keep compatibility and safety intact. For duct sealing and insulation, quality aftermarket materials do the job well. If a Lennox unit is over 15 years old and the heat exchanger or coil is failing, replacement usually makes more sense than repeated repairs, and we’ll tell you that plainly.
See the difference
Before
After
Before
After
Before
AfterLennox Service Pricing in Melrose
There’s no single price for Lennox air duct cleaning in Melrose, because a one-apartment mini-split run and a full walk-up with a retrofitted central system aren’t the same job. What drives cost is the number of systems and returns, how much of the duct run is accessible sheet metal versus improvised flex behind plaster, whether smoke-testing is needed to trace a cross-unit leak, and whether sealing or sanitizing gets added after cleaning.

What you get before work starts:
- A free estimate and one flat price per system, agreed up front. No per-vent pricing.
- A scope that names video inspection, cleaning, sealing, and sanitizing as separate line items so you can see what you’re paying for.
- Before-and-after photos of your own ducts once the work is done.
Call (833) 468-5768 for an exact quote. Estimates are free.
Serving Melrose, NY – Our Local Coverage Area
We serve Melrose and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Lennox Air Duct Cleaning in Melrose
No. Air Duct Cleaning Tremont is an independent Lennox service provider, not manufacturer-affiliated, authorized, or endorsed in any way. We work on Lennox equipment daily and know how these systems are built and how they fail, but any manufacturer warranty question goes to Lennox directly.
Yes, for critical components like control boards, blower motors, and heat exchangers we use OEM Lennox parts so fit and safety stay correct. For duct sealing and insulation, quality aftermarket materials are the right choice. You’ll see which category each part falls into on the written estimate.
It depends on the layout. A single-apartment mini-split or a short retrofit run is a shorter visit; a full walk-up system with a closet-mounted air handler, shared returns, and smoke-testing takes longer. We give you a realistic window with the estimate rather than guessing on the phone. Call (833) 468-5768 to set it up.
Merit Series, Elite Series, and Signature Collection furnaces and air handlers, plus ducted and ductless mini-split systems. The duct and air-path work is our specialty: cleaning, sealing, sanitizing, and the airflow problems that come with them. We don’t do general HVAC repair or installation.
It’s priced per system by a free written estimate, not per vent, and the shape of your ductwork sets the range more than anything else. Nobody can quote a walk-up retrofit accurately over the phone. Call (833) 468-5768 and we’ll walk through your building and put a number in writing.
Service Areas Near Melrose
We also work on Lennox systems in Tremont, University Heights, Bedford Park, Fordham, West Farms, and Morrisania, and across to Longwood. Same pre-war housing, same shared-duct realities. If your building sits near any of these, the work is familiar territory for us.
Book Your Lennox Service in Melrose Today
If your Lennox system is pulling dust, tripping limit switches, or just hasn’t been looked at in years, a video inspection and a written estimate are the place to start. Call (833) 468-5768. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the price is set per job in writing before work begins.
Written by the team at Air Duct Cleaning Tremont.