Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Repair & Sealing Across Melrose
If the air in your Melrose apartment smells like the neighbor’s cooking, or your heating bill keeps climbing while the draft never stops, the ductwork is usually the reason. Duct repair and sealing in Melrose is not the same job it is in the suburbs. Most of the housing here is four- to six-story pre-war tenement stock built between 1900 and 1930, and the ducts running through it are often retrofits squeezed into masonry walls, shared through party walls, or improvised behind window A/C units. We know these buildings. We also know the parking, the narrow halls, and the fact that every job in a dense walk-up starts with figuring out where the air actually comes from. Call (833) 468-5768 and we’ll walk through it with you.
Why Melrose Residents Call Air Duct Cleaning Tremont for Duct Repair & Sealing
We work to a simple standard in Melrose: one flat price per system, agreed before the technician touches anything, with before-and-after photos of your own ducts so you can see what changed. That matters in a neighborhood where duct work is often improvised. A window-unit connection that has torn loose, an exhaust riser shared with the unit next door, a sheet-metal run jammed into lath and plaster – these need a real diagnosis, not a coupon and a shop vac.
Our technicians have up to 8 years of experience with pre-war multifamily systems, and we use Rotobrush and Nikro equipment built for mechanical agitation and high-power extraction, with Abatement Technologies filtration to hold airborne dust down while we work inside an occupied building. We covered the full scope of what we do on our duct repair & sealing page if you want the wider picture.
Response time to Melrose is usually the same day. We answer 24/7, and we dispatch Sunday through Friday, 7am to 7pm. Saturday is our closed day, so a Saturday call gets booked into the next opening. We’re closed Saturdays and we don’t have crews waiting on every block, so a call ahead of time gets you a real appointment window instead of a shrug.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our Duct Repair & Sealing Services in Melrose
The work we do in Melrose leans on three things specific to this housing: flex connections, shared systems, and masonry. Here’s how each service looks in practice.
Flex Duct Repair in Melrose
The most common call we get here is a flex duct connection that has pulled loose behind a window A/C unit. When that connection separates, the unit pulls unfiltered air and lint straight into the room instead of recirculating conditioned air. We reseal the joint, check the register airflow, and confirm the run actually holds pressure. In a Melrose walk-up, that usually takes an hour or two, not a full day.

Mastic Sealant for Pre-War Ducts
Duct tape is a bad joke in a century-old building. It dries, cracks, and peels within a few seasons. We use mastic sealant on joints, seams, and masonry penetrations because it bonds to metal and mortar alike and stays flexible. In Melrose’s pre-war stock, mastic is often the only sealant that will hold on irregular, hand-cut sheet-metal seams that no modern boot fits.

Air Leak Repair in Shared Systems
This is where Melrose gets interesting. Ducts and flues are often shared between adjacent apartments through party walls, so a leak in one unit’s run can pull air from the neighbor’s kitchen or bathroom exhaust. We trace the leak with a camera and pressure readings, then seal it without redirecting the problem into the next apartment over. That last step is what separates a real repair from a temporary patch.

Duct Insulation and Metal Duct Repair
Older sheet-metal runs in Melrose buildings often have failing insulation or gaps at the joints that no amount of caulk will bridge. We back the seam properly before sealing it, then wrap or repair the insulation so the run holds temperature through an unconditioned chase. If a metal run is too far gone, we’ll tell you straight rather than seal over something that won’t hold.
Trusted Brands We Service in Melrose
We use professional-grade equipment, not improvised tools. Our Rotobrush and Nikro systems handle the mechanical agitation and extraction that a shop vacuum simply can’t reach inside a pre-war duct run. Abatement Technologies filtration keeps airborne particulates controlled while we work in an occupied building, and we’re familiar with Honeywell and Aprilaire air quality products when a repair opens the door to a filtration upgrade. We don’t stock parts in a warehouse or claim to have every fitting on hand – we diagnose, we order what’s needed, and we schedule the return visit around your building’s access rules.
See the difference
Before
After
Before
After
Before
AfterCommon Duct Repair & Sealing Problems We See in Melrose Homes
The failure modes here aren’t the same ones you’d see in a suburban ranch house. These four come up again and again in Melrose’s walk-up blocks:
- Flex connections behind window A/C units tear or disconnect. When a window unit is pulled out for the season or reinstalled crooked, the flex duct behind it can tear or pop loose entirely, letting unfiltered air and lint into the living space.
- Shared exhaust risers leak between units through party walls. Sealing one apartment’s ducts can redirect odors and dust from a neighbor’s kitchen or bathroom if the pressure balance isn’t checked first. This is the single most overlooked condition in Melrose.
- Improvised sheet-metal runs develop gaps at joints. Hand-cut metal jammed into lath-and-plaster walls rarely has a clean seam, and mastic alone won’t bridge a gap without proper backing material behind it.
- Original flues and chases lose their seal over decades. Old masonry chases crack and settle, opening paths for air to escape into wall cavities instead of reaching the register.
Pricing for Duct Repair & Sealing in Melrose, NY
What we quote is a flat price per system, agreed before work starts, and the written estimate is what sets the final number. Typical ranges in the Melrose market run like this: a flex duct repair behind a window A/C unit usually lands between $150 and $350; mastic sealing of a run with several joints runs $250 to $500; an air leak repair that requires tracing a shared party-wall system runs $300 to $650 depending on how much access the building allows; and duct insulation repair on a metal run runs $200 to $450. Cost climbs when the building restricts equipment access, when scaffolding or a lift is needed for exterior work, or when the duct is buried behind finished plaster that has to be opened and closed. Call (833) 468-5768 and we’ll give you an honest number on site.
We Also Serve Cities Near Melrose
We work across the surrounding South Bronx and the wider area, including Longwood, Morrisania, Concourse, and Highbridge. The building stock in these neighborhoods overlaps heavily with Melrose’s – pre-war walk-ups, shared risers, window-unit retrofits – so the approach travels with us. If you’re in Melrose or one of the bordering neighborhoods, we can usually get to you the same day.
Serving Melrose, NY – Our Local Coverage Area
We serve Melrose and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Duct Repair & Sealing in Melrose
We test pressure and airflow before sealing anything, because a shared party-wall duct changes the whole approach. Sealing one apartment’s leak without checking the neighbor’s pressure balance can push dust and odors from one unit into the other. We camera-inspect the run, measure static pressure at the registers, then seal with mastic and proper backing so the fix holds on both sides of the wall. Call (833) 468-5768 to schedule an inspection.
Yes, and it’s one of the most common jobs we do in Melrose. The flex connection behind a window unit tears when the unit is pulled and reinstalled, and the resulting gap pulls lint and unfiltered air into the room. We reseal the joint, check the register and return for proper airflow, and confirm the run holds under normal use. Call (833) 468-5768 for a free estimate.
Cleaning removes what’s already inside the duct; sealing closes the gaps that let it back in. In a century-old Melrose walk-up, cleaning without sealing is a temporary fix, because the same torn flex joint or cracked chase will pull debris back in within months. We do both, and we’ll tell you honestly if the sealing is the better first step. Call (833) 468-5768 to talk through it.
Often, yes. In dense walk-up blocks near the 10455 core, ducts and flues are frequently shared between adjacent units, so dust and cooking odors can travel through a leaky joint rather than from your own system. Sealing the shared penetration properly – with pressure checks on both sides – cuts that path. Call (833) 468-5768 and we’ll trace where the dust is actually coming from.
Because uninsulated metal runs inside cold masonry chases lose heat fast and condense moisture, which damages the sealant and attracts dust. Melrose’s pre-war buildings have plenty of these runs, and failing insulation is often why a repair doesn’t last. We repair the seal and the insulation together so the fix holds. Call (833) 468-5768 for an estimate.
Written by the team at Air Duct Cleaning Tremont.